Shear Testers

10 Item(s)

Grid  List 

  1.  Replacement for individual clock type units for SS-HT-30

    Replacement for individual clock type units for SS-HT-30

    SS-HT-30 Timer Boxes are the replacement control boxes for units with the individual clock type timers, we are no longer able to supply the individual clock type timers. This is not a stand alone product, it must be paired with an existing HT-30 Shear Stand.

    Learn More
    $0.00
  2.  Replacement for individual clock type units for SS-HT-8

    Replacement for individual clock type units for SS-HT-8

    SS-HT-8 Timer Boxes are the replacement control boxes for units with the individual clock type timers, we are no longer able to supply the individual clock type timers. This is not a stand alone product, it must be paired with an existing HT-8 Shear Stand.

    Learn More
    $0.00
  3. 30 Position Shear Test Oven

    30 Position Shear Test Oven

    Get unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 30 Position Shear Test Oven. This forced-ventilation shear test oven includes a ramping controller that complies with the SAFT test method ASTM D4498. The variability of SAFT tests depends on the mass in the oven, specific heat factors, wattage of the heating system, fan speed, program and operator technique.

    The 30 Position Shear Test Oven is the result of ChemInstruments' development of a standard rack, controller and oven combination, which greatly aids in producing uniform results between laboratories using the system.

    Learn More
    $0.00
  4. 8 Position Shear Test Oven

    8 Position Shear Test Oven

    Get unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 8 Position Shear Test Oven. This forced-ventilation shear test oven includes a ramping controller that complies with the SAFT test method ASTM D4498. The variability of SAFT tests depends on the mass in the oven, specific heat factors, wattage of the heating system, fan speed, program and operator technique.

    The 8 Position Shear Test Oven is the result of ChemInstruments' development of a standard rack, controller and oven combination, which greatly aids in producing uniform results between laboratories using the system.

    Learn More
    $0.00
  5. Dynamic Shear

    Dynamic Shear

    Quickly measure shear resistance by force rather than time and get a clearer understanding of your adhesive's chemistry. Dynamic shear testing offers a faster, more accurate representation of an adhesives ability to resist polymer disentanglement. Using the ChemInstruments Dynamic Shear, you can graph the actual holding power with one simple test instead of running multiple hang tests and plotting their statistical time-to-fail. The time to collect the data and the integrity of that collected data is considerably better using this device as compared to typical shear testing methods. The Dynamic Shear meets the standards specified in ASTM and FINAT test methods. The included EZ Lab software makes data acquisition and data management easier and provides more powerful analysis capabilities.

    Learn More
    $0.00
  6. High Temperature 30 Bank Shear Tester

    High Temperature 30 Bank Shear Tester

    The High Temperature 30 Bank Shear Tester performs the same tests listed below, plus shear tests in ovens, humidity chambers or freezers. It was designed to perform tests according to PSTC-7 Procedure C and ASTM D 3654 Procedure C.

    Learn More
    $0.00
  7. High Temperature 8 Bank Shear Tester

    High Temperature 8 Bank Shear Tester

    Getting precise measurements every time with high temperature shear tests is easy with the ChemInstruments S-HT-8 High Temperature 8 Bank Shear Tester. It performs a wide variety of shear tests, including PSTC-7 Procedure A & C, TLMI Test No. 7, FINAT test No. 8, and ASTM D 3654. The Shear Tester also performs Procedure C for holding power of pressure sensitive tapes.

    Switches on the standard model can withstand temperatures up to 400°F (204°C). It can also perform shear tests in humidity chambers or freezers.

    Learn More
    $0.00
  8. Integrated 8 Bank Shear and Oven

    Integrated 8 Bank Shear and Oven

    Combining the efforts of our proven shear tester and our powerful shear test oven in one convenient package is the Integrated 8 Bank Shear and Oven.

    Learn More
    $0.00
  9. Oven Plus 30 Bank Shear

    Oven Plus 30 Bank Shear

    Combine the benefits of a proven shear tester and a powerful shear test oven in one convenient package- the Oven Plus 30 Bank Shear. Learn More
    $0.00
  10. Room Temperature 10 Bank Shear Tester

    Room Temperature 10 Bank Shear Tester

    Precise room temperature shear tests are made easier with the ChemInstruments Room Temperature 10 Bank Shear Tester. It performs shear tests according to PSTC-7 Procedure A, TLMI Test No. 7, and ASTM D 3654, Procedure A for holding power of pressure sensitive tapes. It can also be used for PSTC-14, adhesion of pressure sensitive tape to fiberboard at 90° angle and constant stress, and PSTC-7 Procedure B.

    Learn More
    $0.00

10 Item(s)

Grid  List