Rolldown

SKU:
RD
Rolldown

Product Overview

  • Rugged construction, capable of withstanding the abuse of the production environment
  • Simple, one-touch operation creates very repeatable test samples
  • 4.5lb steel roll with Shore A scale 80 durometer silicone rubber covering - PSTC/ASTM specs
  • 2.0Kg steel roll with Shore A scale 80 durometer silicone rubber covering - FINAT spec
  • Steel roll is nickel plated to eliminate corrosion
  • Thickness of rubber covering is 1/4" (6 mm)
  • PSTC/ASTM specs: finished roll dimensions are 1.80" wide and 3.75" diameter
  • FINAT spec: finished roll dimensions are 50mm wide and 91mm diameter
  • Accepts test panels up to 3" x 9" (76 mm x 229 mm)
  • Adjustable stroke length from .5" to 8" (1 cm - 20 cm)
  • Programmable cycle counts from 1 to 10 or continuous
  • Operating temperature range 32° - 150° F (0° - 70° C)
  • Selectable speeds from 5-150"/min (2-60mm/sec) & 200mm/sec (FINAT speed)
  • Universal input voltage from 85-265 VAC (50/60 Hz)

RD Equipment Manual

Accessories

  • Test panels
  • Test panel stops - Allow's you to use thicker test panels without the panels getting pushed out of the way by the rolls
  • Specimen tape cutter
  • Test panel holder

Options

  • Single roll version: Model RD-1000
  • Triple roll version: Model RD-3000
  • FINAT version: includes FTM specified rolls
  • Custom speeds
  • Custom rolls: materials, widths and weights
  • Custom modifications
  • PSTC and TLMI testing manuals and videos

Specifications

  • Height: 9" (23 cm)
  • Width:  19" (48 cm) 
  • Depth: 13" (33 cm) 
  • Weight:  Single roller 37 lbs (17 Kg) Triple roller 47 lbs (21 Kg)

The Rolldown laminates an adhesive coated material to a test substrate. The prepared sample can then be used in a number of differing test procedures. The mechanics of the Rolldown ensures that test samples are prepared at a stable laminating speed and with consistent pressure. The Rolldown comes in two versions. The single roll version prepares one sample at a time. The triple roll version reduces sample preparation time by accommodating three samples at a time. Both machines meet the requirements of PSTC Appendage B, Section 2.7 and ASTM D 3330 Section 5.4.  This Rolldown can also perform FINAT testing according to Section 3.2 on Test Equipment. The Rolldown is one of a handful of devices that are a must for any development or QC laboratory that wishes to ensure the highest quality data. Properly prepared samples help create accurate and credible data.